1Mv3RyR3nTaL
06-29-2005, 06:50 PM
Alright so, i got this desktop from work, thinking that i could jus take the old parts out, and put the new parts in. I turn on the computer, and it goes to a black screen. The screen says:
Floppy Drive A : 1.44 MB 3 1/2"
Floppy Drive B : None
Display Type : VGA/EGA
AMIBIOS Date : 01/21/2002
External Cache : 512kb, Enabled
Share Memory Size : 32MB
Ext. Memory Size: 255MB
Serial Port(s): 3F8
Pararllel Port(s): 378
Processor Clock: 1.60 GHz
Power Management: Enabled
SDRAM at DIMM(s) : 1
Hard Disk(s) Cyl Head Secotr Size LBA 32bit Block PIO ATA
Mode Mode Mode Mode Mode
Secondary Slave : CDROM 4 33
PCI Devices:
Slot 1 PCI Bridge
Onboard USB Controler, IRQ3
Onboard USB Controler, IRQ3
Onboard Ethernet, IRQ5
Bridge USB Controler, IRQ11
Bridge USB Controler, IRQ3
Onboard Multimedia Device, IRQ11
Onboard USB Controller, IRQ3
Onboar IDE, IRQ14,15
AGP VGA, IRQ5
Bridge USB Controller, IRQ5
Bridge Firewire Controller, IRQ11
Then after all that it says:
Searching for boot record from floppy..not found
Boot failure
Insert BOOT diskette in A:
Press any key when ready
Ok...so i dont know what all this means...lol :confused:
I want to kno if any of this stuff is save-able and i also wanted to kno if these new system specs are good.
What i want when i rebuild the computer:
Athlon 64 3800+ (Socket 939)
Motherboard WinFast NF4UK8AA
Memory Kingston ValueRAM KVR400X64C25 (512MB x2)
Graphics ATI Radeon X800XL 256MB
Sound card Sound Blaster Audigy 2 ZS (OEM)
Keyboard Microsoft Natural Multimedia
Mouse Logitech MX510 Optical $28
Hard drive Seagate Barracuda 7200.7 160GB SATA
Optical drive Sony DRU-720A Dual Layer
Floppy drive/media reader Mitsumi FA404A w/flash memory reader (do i even need a floppy drive) :confused:
Power Supply Thermaltake W0068 460W (the power supply that i have in the computer now is Codegen 300w...is that good)..lol..such a dunce when it comes to computers
Operating system Windows XP Home
Any suggestions..to what i want to build will be very helpful. :)
Thanks
Floppy Drive A : 1.44 MB 3 1/2"
Floppy Drive B : None
Display Type : VGA/EGA
AMIBIOS Date : 01/21/2002
External Cache : 512kb, Enabled
Share Memory Size : 32MB
Ext. Memory Size: 255MB
Serial Port(s): 3F8
Pararllel Port(s): 378
Processor Clock: 1.60 GHz
Power Management: Enabled
SDRAM at DIMM(s) : 1
Hard Disk(s) Cyl Head Secotr Size LBA 32bit Block PIO ATA
Mode Mode Mode Mode Mode
Secondary Slave : CDROM 4 33
PCI Devices:
Slot 1 PCI Bridge
Onboard USB Controler, IRQ3
Onboard USB Controler, IRQ3
Onboard Ethernet, IRQ5
Bridge USB Controler, IRQ11
Bridge USB Controler, IRQ3
Onboard Multimedia Device, IRQ11
Onboard USB Controller, IRQ3
Onboar IDE, IRQ14,15
AGP VGA, IRQ5
Bridge USB Controller, IRQ5
Bridge Firewire Controller, IRQ11
Then after all that it says:
Searching for boot record from floppy..not found
Boot failure
Insert BOOT diskette in A:
Press any key when ready
Ok...so i dont know what all this means...lol :confused:
I want to kno if any of this stuff is save-able and i also wanted to kno if these new system specs are good.
What i want when i rebuild the computer:
Athlon 64 3800+ (Socket 939)
Motherboard WinFast NF4UK8AA
Memory Kingston ValueRAM KVR400X64C25 (512MB x2)
Graphics ATI Radeon X800XL 256MB
Sound card Sound Blaster Audigy 2 ZS (OEM)
Keyboard Microsoft Natural Multimedia
Mouse Logitech MX510 Optical $28
Hard drive Seagate Barracuda 7200.7 160GB SATA
Optical drive Sony DRU-720A Dual Layer
Floppy drive/media reader Mitsumi FA404A w/flash memory reader (do i even need a floppy drive) :confused:
Power Supply Thermaltake W0068 460W (the power supply that i have in the computer now is Codegen 300w...is that good)..lol..such a dunce when it comes to computers
Operating system Windows XP Home
Any suggestions..to what i want to build will be very helpful. :)
Thanks